Fuelco Self-Bunded Tanks

Screen Shot 2017-06-02 at 5.07.29 PM

Screen Shot 2017-06-02 at 5.04.36 PM

The Fuelco Aviation Tanks are self bunded tanks suitable for the storage of aviation fuels such as Jet Fuel and Avgas*. Tanks for diesel are also available.

These are built with a stainless steel inner tank specifically designed for aviation fuels.

An integrated dispensing package, designed specifically for your application, turns this aviation fuel tank into a turnkey refuelling system.



Standard features:

  • Self bunded double wall design
  • 304 Stainless steel inner tank or epoxy lined
  • 304 Stainless steel piping and fittings
  • Stainless steel jiggle wire
  • Aluminium floating suction
  • Sloping floor
  • Sampling cabinet
  • Overfill protection system
  • High level

Aquacon® ACO-P EI 1583 6th Edition Aviation Fuel Monitor

ACO-PAquacon® ACO-P

EI 1583 6th Edition Aviation Fuel Monitor
Remove Water and Dirt from Jet Fuel and Avgas Outside-to-In Flow Cartridges

Designed to comply with the JIG Bulletin No. 49


Free and emulsified water removal to less than 5 ppm
1/2 micrometer particle removal
Provides protection against “slugs” of water
Pressure increase signals need for cartridge change
Use with existing filter housings


Patented Aquacon® Filter Cartridges have a unique high-capacity inner absorbent medium which removes all free and emulsified water from hydrocarbon fuels down to less than 5 ppm in the effluent. Absorbed water is chemically locked into …

Velcon DPM Differential Pressure Module

DPMDesigned to comply with the JIG Bulletin No.58, the Velcon DPM is an all inclusive differential pressure monitoring and shutdown system.

The DPM control unit continuously monitors the differential pressure between the inlet and outlet of a filter monitor or filter water separator vessel. Whether static or onboard hydrant carts or refuelers, the DPM monitors the condition of the filter elements. In the event that the filter differential pressure reaches maximum allowable pressure, the industrial strength relay onboard the DPM control unit breaks the deadman circuit, effectively terminating the refueling operation. The system can only be overridden by inserting a …

New Pilot Options for Eaton Carter Hydrant Pit Valves

60554-pilot-optionsEaton’s Carter brand Model 60554 hydrant valve was developed to be used with a pressure control coupler. This revolutionary design removed many of the complicated control devices previously located in the pit, thereby reducing the cost of hydrant systems dramatically.

Eaton’s Carter® brand hydrant valves (Models 60554 & 61654) are now also available with a new line of
“remote” pilot options. These patented designs take the concept one step further by removing the pilots from the Hydrant Valve and replacing it with a sealed male disconnect fitting. As a result you only need to have one pilot for each hydrant …

Video Comparison of 6th Ed Super Absorbent Fiber vs. 4th Ed Super Absorbent Polymer

Video Comparison of 6th Edition P-media (Super Absorbent Fiber) vs. 4th Edition N-media (Super Absorbent Polymer)

Below is a demonstration illustrating the ability of Velcon’s super absorbent media used in our CDF monitor cartridges. Both editions of the media are designed to minimize SAP migration downstream while still maintaining strong cohesion to the media. The new 6th Edition P-media tends to hold it’s shape better and is more resiliant to external forces being applied to it.


Velcon Flow Differential Pressure Module FDPM® MK II

FDPM-MK-IIAutomatic Calculation of Corrected Differential Pressure for Varying Flow Rates

Calculates the corrected differential pressure across the cartridges in systems being operated at less than maximum rated flow on mobile or fixed filter vessels.


The FDPM® MK II builds on its field tested predecessor. Designed to comply with the requirements of industry standards such as ATA 103 and JIG Guidelines, the FDPM® MK II eliminates this normally complicated calculation by automatically calculating the condition of the filters inside a vessel based on the inputs from differential pressure and flow-rate sensors. FDPM® MK II can be used with either mobile …

Hammonds AC Portable Additive System


The AC portable additive system provides precise ratio injection of biocides, anti-icing, corrosion inhibitors and anti-static compounds. Designed specifically for high rate, large volume transfers, these systems handle typical airline fueling operations. Although a 55 gallon drum capacity is standard, the AC cart can be ordered with additive storage up to 110 gallons, sufficient to treat multiple large volume transfers.

Operation is automatic with nothing to turn on and off or adjust. A single point connection from the hydrant vehicle into the cart, and the cart single point fueling nozzle into the aircraft is all that is required. Single and …

Gasboy PLUS Series Fleet Management Systems

The Gasboy PLUS series is a new generation of fleet management systems for today’s operators. They’re the heart of your turnkey Gasboy fleet solution, with choices to get what you need today and build your system as your operation grows.

Gasboy and technology partner Orpak® bring you world class performance in the PLUS series fleet management systems. All Gasboy products are supported by the world’s largest network of fleet product distributors and authorized service contractors. Superior technology and proven solutions add up to a better tomorrow.


Gammon One-CC™ Water Probe

gammonwaterprobeThe Problem with Water Detector Probes has always been that they are impossible to test periodically without injecting water into the vessel. People have been afraid that too much water may be injected. The One-CC Probe solves this simply. First, it has a new, unique design (patent applied for) that only needs 1 ml (1cc) of water for a complete test. Second, it has a built-in water pump, and this pump is only capable of injecting 1 ml (1 cc) of water.

The One-CC™ Water Detector Probe is designed for use in any intrinsically safe electronic system. This new probe …